Pass NSE7_ZTA-7.2 Exam with Updated NSE7_ZTA-7.2 Exam Dumps PDF 2024
NSE7_ZTA-7.2 Exam Dumps - Free Demo & 365 Day Updates
Fortinet NSE7_ZTA-7.2 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 14
Which statement is true about disabled hosts on FortiNAC?
- A. They are marked as unregistered rogue devices
- B. They are placed in the authentication VLAN to reauthenticate
- C. They are quarantined and placed in the remediation VLAN
- D. They are placed in the dead end VLAN
Answer: D
Explanation:
According to the FortiNAC documentation1, disabled hosts are placed in the dead end VLAN, which is a special VLAN that isolates them from the production network. This is done to prevent unauthorized or compromised hosts from accessing network resources or spreading malware. The dead end VLAN must be configured in the AP model or the SSID configuration, and the state must be enforced23. Disabled hosts can be enabled again by the administrator or by reauthenticating through the FortiNAC portal. References := 1:
Enable or disable hosts | FortiNAC 9.4.0 - Fortinet Documentation 2: Technical Tip: Disabled wireless hosts not isolated - FortiNAC 3: Technical Tip: Disabled wired hosts not isolated - FortiNAC
NEW QUESTION # 15
Which two statements are true regarding certificate-based authentication for ZTNA deployment? (Choose two.)
- A. Client certificate configuration is a mandatory component for ZTNA
- B. Certificate actions can be configured only on the FortiGate CLI
- C. The default action for empty certificates is block
- D. FortiGate signs the client certificate submitted by FortiClient.
Answer: A,C
Explanation:
Certificate-based authentication is a method of verifying the identity of a device or user by using a digital certificate issued by a trusted authority. For ZTNA deployment, certificate-based authentication is used to ensure that only authorized devices and users can access the protected applications or resources.
B: The default action for empty certificates is block. This is true because ZTNA requires both device and user verification before granting access. If a device does not have a valid certificate issued by the ZTNA CA, it will be blocked by the ZTNA gateway. This prevents unauthorized or compromised devices from accessing the network.
D: Client certificate configuration is a mandatory component for ZTNA. This is true because ZTNA relies on client certificates to identify and authenticate devices. Client certificates are generated by the ZTNA CA and contain the device ID, ZTNA tags, and other information. Client certificates are distributed to devices by the ZTNA management server (such as EMS) and are used to establish a secure connection with the ZTNA gateway.
A: FortiGate signs the client certificate submitted by FortiClient. This is false because FortiGate does not sign the client certificates. The client certificates are signed by the ZTNA CA, which is a separate entity from FortiGate. FortiGate only verifies the client certificates and performs certificate actions based on the ZTNA tags.
C: Certificate actions can be configured only on the FortiGate CLI. This is false because certificate actions can be configured on both the FortiGate GUI and CLI. Certificate actions are the actions that FortiGate takes based on the ZTNA tags in the client certificates. For example, FortiGate can allow, block, or redirect traffic based on the ZTNA tags.
References :=
1: Technical Tip: ZTNA for Corporate hosts with SAML authentication and FortiAuthenticator as IDP
2: Zero Trust Network Access - Fortinet
NEW QUESTION # 16
Exhibit.
Which two statements are true about the hr endpoint? (Choose two.)
- A. The endpoint will be moved to the remediation VLAN
- B. The endpoint has failed the compliance scan
- C. The endpoint application inventory could not be retrieved
- D. The endpoint is marked as a rogue device
Answer: B,D
Explanation:
Based on the exhibit, the true statements about the hr endpoint are:
B: The endpoint is marked as a rogue device: The "w" symbol typically indicates a warning or an at-risk status, which can be associated with an endpoint being marked as rogue due to failing to meet the security compliance requirements or other reasons.
C: The endpoint has failed the compliance scan: The "w" symbol can also signify that the endpoint has failed a compliance scan, which is a common reason for an endpoint to be marked as at risk.
NEW QUESTION # 17
What are the three core principles of ZTA? (Choose three.)
- A. Minimal access
- B. Assume breach
- C. Be compliant
- D. Verity
- E. Certify
Answer: A,B,D
Explanation:
Zero Trust Architecture (ZTA) is a security model that follows the philosophy of "never trust, always verify" and does not assume any implicit trust for any entity within or outside the network perimeter. ZTA is based on a set of core principles that guide its implementation and operation. According to the NIST SP 800-207, the three core principles of ZTA are:
A: Verify and authenticate. This principle emphasizes the importance of strong identification and authentication for all types of principals, including users, devices, and machines. ZTA requires continuous verification of identities and authentication status throughout a session, ideally on each request. It does not rely solely on traditional network location or controls. This includes implementing modern strong multi-factor authentication (MFA) and evaluating additional environmental and contextual signals during authentication processes.
D: Least privilege access. This principle involves granting principals the minimum level of access required to perform their tasks. By adopting the principle of least privilege access, organizations can enforce granular access controls, so that principals have access only to the resources necessary to fulfill their roles and responsibilities. This includes implementing just-in-time access provisioning, role-based access controls (RBAC), and regular access reviews to minimize the surface area and the risk of unauthorized access.
E: Assume breach. This principle assumes that the network is always compromised and that attackers can exploit any vulnerability or weakness. Therefore, ZTA adopts a proactive and defensive posture that aims to prevent, detect, and respond to threats in real-time. This includes implementing micro-segmentation, end-to-end encryption, and continuous monitoring and analytics to restrict unnecessary pathways, protect sensitive data, and identify anomalies and potential security events.
References :=
1: Understanding Zero Trust principles - AWS Prescriptive Guidance
2: Zero Trust Architecture - NIST
NEW QUESTION # 18
Exhibit.
Which statement is true about the configuration shown in the exhibit?
- A. default_ZTNARoot CA signs the FortiClient certificate for the SSL connectivity to FortiClient EMS
- B. The connection from FortiClient to FortiClient EMS uses TCP and TLS 1.2.
- C. It the FortiClient EMS server certificate is invalid, FortiClient connects silently.
- D. The domain that FortiClient is connecting to should match the domain to which the certificate is issued.
Answer: B
Explanation:
The exhibit shows the EMS Settings where various configurations related to network security are displayed.
Option C is correct because, in the settings, it is indicated that HTTPS port is used (which operates over TCP) and SSL certificates are involved in securing the connection, implying the use of TLS for encryption and secure communication between FortiClient and FortiClient EMS.
Option A is incorrect because the domain that FortiClient is connecting to does not have to match the domain to which the certificate is issued. The certificate is issued by the ZTNA CA, which is a separate entity from the domain. The certificate only contains the device ID, ZTNA tags, and other information that are used to identify and authenticate the device.
Option B is incorrect because if the FortiClient EMS server certificate is invalid, FortiClient does not connect silently. Instead, it performs the Invalid Certificate Action that is configured in the settings. The Invalid Certificate Action can be set to block, warn, or allow the connection.
Option D is incorrect because default_ZTNARoot CA does not sign the FortiClient certificate for the SSL connectivity to FortiClient EMS. The FortiClient certificate is signed by the ZTNA CA, which is a different certificate authority from default_ZTNARoot CA. default_ZTNARoot CA is the EMS CA Certificate that is used to verify the identity of the EMS server.
References :=
[1]: Technical Tip: ZTNA for Corporate hosts with SAML authentication and FortiAuthenticator as IDP
[2]: Zero Trust Network Access - Fortinet
NEW QUESTION # 19
Which three core products are mandatory in the Fortinet ZTNA solution'' {Choose three.)
- A. FortiClient
- B. FortiToken
- C. FortiGate
- D. FortiClient EMS
- E. FortiAuthenticator
Answer: A,C,D
Explanation:
Fortinet ZTNA solution is a zero-trust network access approach that provides secure and granular access to applications hosted anywhere, for users working from anywhere. The three core products that are mandatory in the Fortinet ZTNA solution are:
FortiClient EMS: This is the central management console that orchestrates the ZTNA policies and provides visibility and control over the endpoints and devices. It also integrates with FortiAuthenticator for identity verification and FortiAnalyzer for reporting and analytics.
FortiClient: This is the endpoint agent that supports ZTNA, VPN, endpoint protection, and vulnerability scanning. It establishes encrypted tunnels with the ZTNA proxy on the FortiGate and provides device posture and single sign-on (SSO) capabilities.
FortiGate: This is the next-generation firewall that acts as the ZTNA proxy and enforces the ZTNA policies based on user identity, device posture, and application context. It also provides security inspection and threat prevention for the ZTNA traffic.
References := Zero Trust Network Access (ZTNA) - Fortinet, Zero-Trust Network Access Solution | Fortinet, and Fortinet ZTNA | Fortinet Case Study.
NEW QUESTION # 20
An administrator has to configure LDAP authentication tor ZTNA HTTPS access proxy Which authentication scheme can the administrator apply1?
- A. Form-based
- B. NTLM
- C. Digest
- D. Basic
Answer: A
Explanation:
LDAP (Lightweight Directory Access Protocol) authentication for ZTNA (Zero Trust Network Access) HTTPS access proxy is effectively implemented using a Form-based authentication scheme. This approach allows for a secure, interactive, and user-friendly means of capturing credentials. Form-based authentication presents a web form to the user, enabling them to enter their credentials (username and password), which are then processed for authentication against the LDAP directory. This method is widely used for web-based applications, making it a suitable choice for HTTPS access proxy setups in a ZTNA framework.References:FortiGate Security 7.2 Study Guide, LDAP Authentication configuration sections.
NEW QUESTION # 21
An administrator is trying to create a separate web tittering profile for off-fabric and on-fabric clients and push it to managed FortiClient devices Where can you enable this feature on FortiClient EMS?
- A. System settings
- B. ZTNA connection rules
- C. On-fabric rule sets
- D. Endpoint policy
Answer: D
Explanation:
To create a separate web filtering profile for off-fabric and on-fabric clients and push it to managed FortiClient devices in FortiClient EMS, the feature can be enabled in:
A: Endpoint Policy: This is where administrators can define and manage different policies for FortiClient endpoints. These policies can include settings for web filtering, which can be customized for on-fabric and off-fabric scenarios.
The other options do not directly relate to the creation and management of web filtering profiles:
B: ZTNA Connection Rules: These rules are more focused on access control and do not deal directly with web filtering profiles.
C: System Settings: This section typically includes overall system configurations rather than specific policy definitions.
D: On-fabric Rule Sets: While important for on-fabric configurations, they don't directly deal with web filtering profiles.
References:
FortiClient EMS Administration Guide.
Managing Endpoint Policies in FortiClient EMS.
NEW QUESTION # 22
Exhibit.
Based on the ZTNA logs provided, which statement is true?
- A. Traffic is allowed by firewall policy 1
- B. The external IP for ZTNA server is 10 122 0 139.
- C. An authentication scheme is configured
- D. The Remote_user ZTNA tag has matched the ZTNA rule
Answer: D
Explanation:
Based on the ZTNA logs provided, the true statement is:
A: The Remote_user ZTNA tag has matched the ZTNA rule: The log includes a user tag "ztna_user" and a policy name "External_Access_FAZ", which suggests that the ZTNA tag for "Remote_User" has successfully matched the ZTNA rule defined in the policy to allow access.
The other options are not supported by the information in the log:
B: An authentication scheme is configured: The log does not provide details about an authentication scheme.
C: The external IP for ZTNA server is 10.122.0.139: The log entry indicates "dstip=10.122.0.139" which suggests that this is the destination IP address for the traffic, not necessarily the external IP of the ZTNA server.
D: Traffic is allowed by firewall policy 1: The log entry "policyid=1" indicates that the traffic is matched to firewall policy ID 1, but it does not explicitly state that the traffic is allowed; although the term "action=accept" suggests that the action taken by the policy is to allow the traffic, the answer option D could be considered correct as well.
References:
Interpretation of FortiGate ZTNA Log Files.
Analyzing Traffic Logs for Zero Trust Network Access.
NEW QUESTION # 23
In which FortiNAC configuration stage do you define endpoint compliance?
- A. Network modeling
- B. Policy configuration
- C. Device onboarding
- D. Management configuration
Answer: B
Explanation:
Endpoint compliance is defined in the policy configuration stage of FortiNAC. Endpoint compliance policies specify which endpoint compliance configuration and user/host profile are applied to a host based on its location, user, and device type. Endpoint compliance configurations define whether a host is required to download an agent and undergo a scan, permitted access with no scan, or denied access. The scan parameters and security actions are also configured in the endpoint compliance configurations. Therefore, to define endpoint compliance, you need to create and assign endpoint compliance policies and configurations in the policy configuration stage of FortiNAC. References := https://docs.fortinet.com/document/fortinac/9.4.0/administration-guide/985922/endpoin
https://docs.fortinet.com/document/fortinac/9.4.0/fortinac-manager/161887/endpoint-compliance-configurations
NEW QUESTION # 24
Which statement is true about FortiClient EMS in a ZTNA deployment?
- A. Generates and installs client certificates on managed endpoints
- B. Provides network and user identity authentication services
- C. Acts as ZTNA access proxy for managed endpoints
- D. Uses endpoint information to grant or deny access to the network
Answer: D
Explanation:
In a ZTNA (Zero Trust Network Access) deployment, FortiClient EMS:
A: Uses endpoint information to grant or deny access to the network: FortiClient EMS plays a critical role in ZTNA by using information about the endpoint, such as its security posture and compliance status, to determine whether to grant or deny network access.
The other options do not accurately represent the role of FortiClient EMS in ZTNA:
B: Provides network and user identity authentication services: While it contributes to the overall ZTNA strategy, FortiClient EMS itself does not directly provide authentication services.
C; Generates and installs client certificates on managed endpoints: Certificate management is typically handled by other components in the ZTNA framework.
D: Acts as ZTNA access proxy for managed endpoints: FortiClient EMS does not function as an access proxy; its role is more aligned with endpoint management and policy enforcement.
References:
FortiClient EMS in Zero Trust Network Access Deployment.
Role of FortiClient EMS in ZTNA.
NEW QUESTION # 25
Exhibit.
An administrator has to provide on-fabric clients with access to FortiAnalyzer using ZTNA tags Which two conditions must be met to achieve this task? (Choose two.)
- A. The ZTNArule must be configured on FortiClient
- B. The IP/MAC based firewall policy must be configured on FortiGate
- C. The ZTNA server must be configured on FortiGate
- D. The on-fabric client should have FortiGate as its default gateway
Answer: C,D
Explanation:
For on-fabric clients to access FortiAnalyzer using ZTNA tags, the following conditions must be met:
A: The on-fabric client should have FortiGate as its default gateway: This is essential to ensure that all client traffic is routed through FortiGate, where ZTNA policies can be enforced.
B: The ZTNA server must be configured on FortiGate: For ZTNA tags to be effectively used, the ZTNA server, which processes and enforces these tags, must be configured on the FortiGate appliance.
References :=
Configuring ZTNA tags and tagging rules
Synchronizing FortiClient ZTNA tags
FortiAnalyzer
Technical Tip: ZTNA Tags fail to synchronize between FortiClient and FortiGate
NEW QUESTION # 26
What are two functions of NGFW in a ZTA deployment? (Choose two.)
- A. Packet Inspection
- B. Acts as segmentation gateway
- C. Device discovery and profiling
- D. Endpoint vulnerability management
Answer: B,C
Explanation:
NGFW stands for Next-Generation Firewall, which is a network security device that provides advanced features beyond the traditional firewall, such as application awareness, identity awareness, threat prevention, and integration with other security tools. ZTA stands for Zero Trust Architecture, which is a security model that requires strict verification of the identity and context of every request before granting access to network resources. ZTA assumes that no device or user can be trusted by default, even if they are connected to a corporate network or have been previously verified.
In a ZTA deployment, NGFW can perform two functions:
Acts as segmentation gateway: NGFW can act as a segmentation gateway, which is a device that separates different segments of the network based on security policies and rules. Segmentation can help isolate and protect sensitive data and applications from unauthorized or malicious access, as well as reduce the attack surface and contain the impact of a breach. NGFW can enforce granular segmentation policies based on the identity and context of the devices and users, as well as the applications and services they are accessing. NGFW can also integrate with other segmentation tools, such as software-defined networking (SDN) and microsegmentation, to provide a consistent and dynamic segmentation across the network.
Device discovery and profiling: NGFW can also perform device discovery and profiling, which are processes that identify and classify the devices that are connected to the network, as well as their attributes and behaviors. Device discovery and profiling can help NGFW to apply the appropriate security policies and rules based on the device type, role, location, health, and activity. Device discovery and profiling can also help NGFW to detect and respond to anomalous or malicious devices that may pose a threat to the network.
References: =
Some possible references for the answer and explanation are:
What is a Next-Generation Firewall (NGFW)? | Fortinet : What is Zero Trust Network Access (ZTNA)? | Fortinet : Zero Trust Architecture Explained: A Step-by-Step Approach : The Most Common NGFW Deployment Scenarios : Sample Configuration for Post vWAN Deployment
NEW QUESTION # 27
......
NSE7_ZTA-7.2 Dumps - Pass Your Certification Exam: https://testking.pdf4test.com/NSE7_ZTA-7.2-actual-dumps.html
